網站標志
Welcome to Shengzhou Horse Brand Machinery Co. , Ltd. !
News Center
Website Qr Code
Tension control of winder
Summary:The whole machine of winder is generally composed of several spindle boxes with the same structure. Each spindle box has three main functional parts:
The whole machine of winder is generally composed of several spindle boxes with the same structure. Each spindle box has three main functional parts: winding of winding drum, traverse movement of guide wire and tension control. The winding part of silk slip is mainly driven by the transmission mechanism to complete the winding of silk thread; the transverse moving part of the guide wire is used to move the thread parallel to the side of the drum to form bobbins of various specifications and shapes The speed is determined by the set winding ratio following the spinning speed of the bobbin; the tension control part mainly completes the real-time tension control during the winding process. On the basis of adopting single spindle independent transmission mode, each component movement is driven by a separate servo motor or brushless DC motor. The special motion control device and digital drive module control the various actions in the winding process in real time, and adjust the machine parameters according to the winding process requirements. Moreover, due to the use of advanced Fieldbus Industrial network technology, the whole machine is required Up to 128 ingot boxes can be configured, and the upper computer can set parameters and monitor the status.

Shengzhou Ma Pai Machinery Co. , Ltd.    Support:7m    浙ICP備13024228號-1

Hotline:
13967597669
免费精品国自产拍在线播放